AMDAM Detailed Schedule - (13 Nov)
Plenary Lectures Detailed Schedule - (14 Nov)
Keynote Lectures detailed Schedule (15 Nov)
Technical Sessions detailed Schedule (15 - 16 Nov)
Dr. Samir V Kamat, Distinguished Scientist & Secretary, Department of Defence R&D and Chairman, DRDO
President, Indian Institute of Metals
Dr. Samir V Kamat has taken over as Secretary DDR&D and Chairman Defence Research and Development Organisation (DRDO) on 26th Aug 2022. Dr. Kamat completed his B. Tech (Hons) in Metallurgical Engineering from IIT Kharagpur in 1985 and PhD in Materials Science and Engineering from The Ohio State University, USA in 1988 and joined DRDO in 1989.
Chief Guest:
Shri Faggan Singh Kulaste, Hon'ble Union Minister of State, Ministry of Steel & Rural Development, Government of IndiaGuest of Honour:
Professor Basuthkar Jagadeeshwar Rao, Vice-Chancellor, University of Hyderabad
Program Details
There will be three programs all together for this evening:
i) Inverted mud pots with lit lamps dance : 45 mins (19:30 hrs - 20:15 hrs)
by Dr Manjula Ramaswamy Team, Sri Rama Nataka Niketan, Alwal, Secunderabad, Telangana
ii) Flute & Tabla jugalbandi : 60 mins (20:15 hrs - 21:15 hrs)
by Mr. Tejas Vinchurkar(in Flute), Mrs. Mitali Vinchurkar (in Tabla) & Mr Yogesh Pathak (in Keyboard), Mumbai & Indore
(Dinner will start along with this jugalbandi program)
Session I, 15th Nov., 2022 | Ferrous Materials 1 |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:42 | Role of Process Parameters on Calcium Recovery & Internal Quality of Aluminium Killed Steel (Invited) | Mr. Somnath Kumar |
11:42 | 11:54 | Use of Ultra Slow-Motion Cameras for Troubleshooting of High-speed equipment at Wire Rod Mill | Mr. RIZWAN HAIDER |
11:54 | 12:06 | Investigation of hydrogen embrittlement in a high manganese twinning induced plasticity steel | Ms. Heena Khanchandani |
12:06 | 12:18 | Novel Uses of Discarded Work Rolls of Cold Rolling Mills in Hot Strip Mill of Tata Steel INDIA | Mr. UDAY SHANKER GOEL |
12:18 | 12:30 | Reducing the Fuel consumption with the usage of Direct Reduced Iron in BF2 @ JSW Steel Ltd, Salem Works | Mr. KARTHIK THEENATHAYALAN |
12:30 | 12:42 | INVESTIGATION OF STEEL PROCESSING PARAMETERS AFFECTING CLEANLINESS OF TI-BEARING AL-KILLED ULTRA LOW CARBON GRADES | Mr. Prasenjit Chanda |
12:42 | 12:54 | Inclusion control in high carbon wire rods for tyre cord | Mr. Sethu Prasanth Shanmugam |
12:54 | 13:06 | Characterization of mould fluxes for high speed casting of Low carbon Slab and Thin Slab | Mr. RAHUL KUMAR |
13:06 | 13:18 | Improvement in steel cleanliness by development of oxygen bowing prediction model | Mr. Avnish Kumar |
Session II, 15th Nov., 2022 | Ferrous Materials 2 |
| |
|
|
|
|
Start time | End time | Topic | By |
14:15 | 14:35 | Strengthening and failure analysis of B2 precipitation hardened ultra high strength-ductility low density steel (Invited) | Prof Sadhan Ghosh |
14:35 | 14:47 | Development of yield strength prediction model for rebar at MM | Mr. Kunal Khirade |
14:47 | 14:59 | Sand casting of surface alloyed butterfly valve with improved hardness, adhesion, and corrosion resistance by incorporating metal powders in-mold coatings | Dr. AJAY KUMAR |
14:59 | 15:11 | Optimization of Hot Rolled Material characteristics and processing parameters to achieve improved quality with better productivity during Cold Rolling Operation of High Carbon Grade Steel | Mr. Akash Jaiswal |
15:11 | 15:23 | Delay reduction using Post Combustion Lances in BOF Steelmaking process | Ms. Indrani Dey |
15:23 | 15:35 | Effect of de-oxidation on Inclusion evolution in Bearing steels | Mr. Soorya Prakash Jayaraj |
15:35 | 15:47 | Smart Sensors and IIoT a vital role player in Advanced Manufacturing Processes for Steel Industry | Mr. Ashish Mukherjee Mukherjee |
15:47 | 15:59 | Productivity Improvement through Heat Loss control at F blast furnace Tata Steel | Mr. Ishwari Prasad Gupta |
15:59 | 16:11 | Study on Mechanical and Corrosion Properties of High Strength TMT Re-bars used in Concrete Reinforcement | Mr. RADHA KANTA NANDI |
Session III, 15th Nov., 2022 | Ferrous Materials 3 |
| |
|
|
|
|
Start time | End time | Topic | By |
16:30 | 16:50 | Advanced Electrical Steels for Next Generation Mobility (Invited) | Dr. Saurav Chatterjee |
16:50 | 17:10 | AI and ML approach in steel technology, processing and metallurgy (Invited) | Dr. Ritwik Basu |
17:10 | 17:22 | Mold flux design criteria for continuous casting of high aluminium steels | Mr. Bhupendra Kumhare |
17:22 | 17:34 | SOLUTION FOR PRODUCING LOW PHOSPHOROUS STEEL THROUGH INDUCTION FURNACE | Ms. Neha Jha |
17:34 | 17:46 | Improvement in Desulphurization Reagent Efficiency to reduce Mg & Lime consumption at Tata Steel LD#3 DS Station | Mr. J Babu |
17:46 | 17:58 | Optimization of chemistry and process parameters to reduce the resistivity of IS2879EWNR wire rod coils for the application of metal arc welding electrodes at WRM-2 in the Visakhapatnam Steel plant. | Mr. ABHISHEK MAITI |
17:58 | 18:10 | Optimisation of Process Parameters and its effect on Refractory Lining Life of Electric Arc Furnace | Mrs. Baisakhi Shetia |
18:10 | 18:22 | Development of Aluminium Nitride Dispersion strengthened Steel | Mr. Akeshwar Singh Yadav |
18:22 | 18:34 | Design of Oxygen Pipeline for enrichment of Cold Blast going to Blast Furnace Stoves - A case Study | Mr. Tathagata Bhattacharya |
Session I, 15th Nov., 2022 | Advanced Composites I | |||
Start time | End time | Topic | By | |
11:30 | 11:50 | Materials for missile propulsion & TPS systems (Invited) | Dr. M Anil Kumar | |
11:50 | 12:10 | Few-Layered Graphene and Its Composites for Diverse Applications (Invited) | Dr.-Ing. V. V. S. S. Srikanth | |
12:10 | 12:30 | Carbon Fiber Reinforced Silicon Carbide Ceramic Matrix Composites for High Temperature Aerospace Applications: An ICVI Approach (Invited) | Dr. Sarabjit Singh | |
12:30 | 12:42 | Effect of Nano Oxide Dispersoids on Microstructure for improved Strength and Ductility of Fe3Al Intermetallics | Mrs. Vijaya Durga Pothula | |
12:42 | 12:54 | Squeeze infiltration processingand characterisation of Al-SiC Composite for thermal management application | Mr. Visakh Manoj | |
12:54 | 13:06 | Preparation, Characterization and Densification of W-Ag Nanocomposites | Dr. PRASANTA SAHOO | |
13:06 | 13:18 | Processing and characterization of Ni coated unidirectional carbon fiber reinforced A356 Aluminum Matrix Composite by Squeeze Infiltration Technique | Mr. AKHIL M G | |
13:18 | 13:30 | Transformation induced toughening of bimodal particulate of Al2O3-3YSZ-CNT composite | Dr. ALOK BHADAURIA | |
Session II, 15th Nov., 2022 | Advanced Composites II | |||
Start time | End time | Topic | ||
14:15 | 14:35 | Fabrication of WC based cemented carbides using CrMnFeCoNi high entropy alloy as a binder phase (Invited) | Prof. Bharat Bhusan Panigrahi | |
14:35 | 14:55 | Towards high strength Si3N4 for high temperature microwave application- A microstructural engineering approach (Invited) | Dr. Mithun Palit | |
14:55 | 15:15 | Advanced and functional composites for defence applications (Invited) | Dr. P Rama Subba Reddy | |
15:15 | 15:27 | Flash sintering of oxide ceramics | Dr. Devinder Yadav | |
15:27 | 15:39 | Effect of TiB2 particulates on creep performance of 304 stainless steel: A study using Impression creep technique | Dr. Silani Sahoo | |
15:39 | 15:51 | Surface Integrity of Tungsten Heavy Alloy in Precision Grinding by Conventional Abrasive Wheels - An Experimental Investigation | Mr. Srinivasa Rao Nandam | |
15:51 | 16:03 | Microstructural Studies on Nanostructured 2-Dimensional Tungsten disulfide Reinforced Al-Cu Alloy Matrix Composites | Dr. JOYDIP JOARDAR | |
16:03 | 16:15 | Development of Al3BC reinforced novel in-situ Al-based metal matrix composites via warm-extrusion | Prof. Debdas Roy | |
Session III, 15th Nov., 2022 | Mechanical Behaviour I | |||
Start time | End time | Topic | By | |
16:30 | 16:50 | Effect of Sample Geometry on Size-Effect of Power Law Creep (Invited) | Prof. Praveen Kumar | |
16:50 | 17:10 | Deformation and fracture mechanisms in nano-structured maraging steels characterised through in-situ mechanical tests (Invited) | Prof. B Nagamani Jeya | |
17:10 | 17:22 | Accurate Evaluation of High Temperature Erosion of Advanced Materials | Dr. Debdutt Patro | |
17:22 | 17:34 | Microstructural characterization, mechanical properties, electrical conductivity and corrosion studies of Fe-MWCNTs composite fabricated by conventional powder metallurgy | Dr. Debasis Chaira | |
17:34 | 17:46 | An innovative duplex surface treatment for significantly enhancing the corrosion-fatigue performance of Al alloys | Dr. Yarlagadda Madhavi | |
17:46 | 17:58 | Enhancing the high-temperature strength of Sc containing Al-Zn-Cu-Mg alloy | Ms. Diya Mukherjee | |
17:58 | 18:10 | Mechanistic insight of MAX phase formation: effect of starting precursor stoichiometry | Dr. Nisha Verma | |
18:10 | 18:22 | Compositional gradient nanocrystalline Ni-W coatings by electrodeposition for superior wear resistance | Mr. Lavakumar Bathini | |
18:22 | 18:34 | Characterization of Irradiation Induced Changes in Fracture Toughness of SS316 L(N) and SS304 L(N) Using Instrumented Impact Testing of Sub size Charpy V Notch specimens | Mr. RAN VIJAY KUMAR | |
18:34 | 18:46 | Evaluation and Prediction of Fatigue Behavior of Carburized Steel Under Uniaxial and Torsional Loading | Dr. Bhalchandra Bhadak |
Session I, 15th Nov., 2022 | Additive Manufacturing I |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | Heat treatment optimization of Additively Manufactured Alloys towards thermally stable mechanical properties (Invited) | Dr. Dheepa Srinivasan |
11:50 | 12:10 | Widening the choice of build materials for metal additive manufacturing (Invited) | Prof. G.D Janaki Ram |
12:10 | 12:22 | Additive Manufacturing of 316L Rectangular Plate via Friction Surfacing | Dr. Shashi Kumar |
12:22 | 12:34 | Additive Manufactured Aero-turbine Blade | Prof. Ajit Behera |
12:34 | 12:46 | Feasibility study of producing Alloy 625 component by wire arc additive manufacturing | Dr. HEMANT KUMAR |
12:46 | 12:58 | A Study on Single Track Laser Melting of Ti6Al4V Powder | Dr. KURIAN ANTONY |
12:58 | 13:10 | Enhanced coercivity in additively manufactured Nd-Fe- B rare-earth magnet | Mr. Kavita Srikanti |
13:10 | 13:22 | Investigating The Structure Property Correlation for Wire Arc Additive Manufactured Nuclear Grade Stainless Steel | Dr. Shivraman . |
13:22 | 13:34 | Development of Dump Mesh Component for Missile Application using PBF 3D Printing Technology | Mr. V Srinivas |
Session II, 15th Nov., 2022 | Materials Joining I | ||
Start time | End time | Topic | By |
14:15 | 14:35 | Improving arc stability during gas metal arc-wire directed energy deposition additive manufacturing of titanium (Invited) | Dr. Murugaiyan Amirthalingam |
14:35 | 14:55 | Welding Technology Development for High Strengtg Steel for Underwater | Dr. Biswajyoti Basu |
14:55 | 15:15 | Low silicate welding consumable development (Invited) | Dr. Niyanth Sridharan |
15:15 | 15:27 | Heat Affected Zone Studies of 410NiMo Martensitic Stainless Steel using Thermomechanical Simulator | Dr. Sivasankari R |
15:27 | 15:39 | Influence of N2 shielding on weld/interface morphology and localized corrosion susceptibility of A-TIG welded 2205 duplex stainless steels | Dr. RAFFI MOHAMMED |
15:39 | 15:51 | Investigation of Nitrogen effect on Nickel Free High Nitrogen Stainless Steel weldment using GTAW welding process | Mr. Dhanasekar R |
15:51 | 16:03 | Study on weld bead morphology of electron beam welded metastable beta titanium alloy | Dr. Kishore Babu Nagumothu |
16:03 | 16:15 | Effect of grain size on the heat affected zone (HAZ) cracking in nickel base super alloy XH67 | Mr. Ravi Ranjan Kumar |
Session III, 15th Nov., 2022 | Materials Joining II |
| |
|
|
|
|
Start time | End time | Topic | By |
16:30 | 16:50 | Improvement of Ti-15V-3Al-3Cr-3Sn GTAW weld performance by filler modification (Invited) | Prof. T. Mahesh Kumar |
16:50 | 17:10 | Friction Stir Welding of High Strength Materials (Invited) | Dr. Suresh Meshram |
17:10 | 17:30 | Direct copper bonding of high thermal conductivity AlN for high power electronic applications (Invited) | Dr. Manish Patel |
17:30 | 17:42 | Characterization studies of post weld heat treatments on automotive steel welds | Dr. RVSM. Ramakrishna |
17:42 | 17:54 | Dissimilar Rotary Friction Welding of SS321 and AA2219 with Multi-Interlayer | Dr. Amber Shrivastava |
17:54 | 18:06 | Cold Metal Transfer Welding of Aluminium 5083 Alloy to Pure Titanium | Dr. Manjaiah M |
18:06 | 18:18 | Vacuum Brazing of LENSTM Deposited NiCr-YSZ Functionally Gradient Coatings using a Combination of Ni Base Braze Alloy and TiH2 | Mr. Amit Singh |
18:18 | 18:30 | A Feasibility Study on Friction Stir-based Crack Repair of Stainless Steel Plates used in Spent Nuclear Fuel-Dry Storage Canisters | Dr. Madhumanti Bhattacharyya |
18:30 | 18:42 | AUTOGENOUS DIODE LASER WELDING OF IRON-BASED SUPERALLOYS: A-286 and INCOLOY-800 | Mr. Hitesh Kumar |
Session I, 15th Nov., 2022 | Ultra High Temperature Materials I: Coatings |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | Surface Engineering for Life Enhancement of Aerospace Applications (Invited) | Dr. L Ramakrishna |
11:50 | 12:10 | Ultra-high Temperature Resistant Thermal Barrier Coatings for Air Breathing Hypervelocity Engines (Invited) | Dr. Md. Zafir Alam |
12:10 | 12:22 | Thermal Barrier Coating on Nickel-Based Superalloys Using High Entropy Alloys | Dr. Shashikant Vagge |
12:22 | 12:34 | Development of highly oriented and dense pyrolytic graphite coatings under different CVD pressure conditions for nuclear application | Mr. Vetrivendan E |
12:34 | 12:46 | Effect of Ti content on the structure and properties of MoNbTaW refractory high entropy alloy coatings | Mr. BHARATH KUMAR BANDLA |
12:46 | 12:58 | Fatigue damage in the freestanding Pt-aluminide bond coat in the temperature range of ambient to 1000°C | Mr. MAHESH KUMAR KUMAWAT |
12:58 | 13:10 | Development of Ceramic Matrix Composite (CMC) Coating by Laser Cladding | Mr. Manoj Kumar |
13:10 | 13:22 | Thermally sprayed Lanthanum Phosphate (LaPO4) coatings | Mr. SHUBHRA Bajpai |
13:22 | 13:34 | Establishing Permeability Rig for Non- Destructive Evaluation of Porosity in Thermally Sprayed Coatings | Mr. Aadil |
Session II, 15th Nov., 2022 | Biomaterials |
| |
|
|
|
|
Start time | End time | Topic | By |
14:15 | 14:35 | Single unit functionally graded bioresorbable electrospun scaffold for scar-free full-thickness skin wound healing (Invited) | Prof. Debrupa Lahiri |
14:35 | 14:55 | Bilayered YSZ-Ti6Al4V dental implants by Spark Plasma Sintering (Invited) | Dr. Dibyendu Chakravarty |
14:55 | 15:07 | Effect of Calcium and Zinc on biodegradable Magnesium alloy | Mr. Anil Chaubey |
15:07 | 15:19 | High-manganese and nitrogen stabilized austenitic stainless steel: a material for orthopedic implants | Dr. Girija Shankar Mahobia |
15:19 | 15:31 | Influence of Zr addition on Microstructure, Mechanical properties and Degradation of Biodegradable Mg-Zn alloys | Dr. Kaliyan Hembram |
15:31 | 15:43 | Molecular Dynamics based Nanoindentation Modelling and Simulation of Ti-Nb Alloy for Orthopaedic Implants | Mr. Pritam Sadhukhan |
Session III, 15th Nov., 2022 | Corrosion and Oxidation of Materials |
| |
|
|
|
|
Start time | End time | Topic | By |
16:30 | 16:50 | Tailoring Corrosion Resistance of Titanium based alloy (Ti6Al4V) by Laser Surface Engineering (Invited) | Prof. Jyotsna Dutta Majumdar |
16:50 | 17:10 | Hydrogen diffusion and trapping behaviour in dual-phase steel: An electrochemical hydrogen permeation study (Invited) | Prof. Lakshman Neelakantan |
17:10 | 17:30 | Corrosion Behaviour of Surface Nanostructured Ti-13Nb-13Zr alloy (Invited) | Prof Kaushik Chattopadhyay |
17:30 | 17:50 | Enhancing high-temperature hot corrosion resistance in a typical Ni-based superalloy through grain boundary engineering and grain boundary serration synergy (Invited) | Prof. Sumantra Mandal |
17:50 | 18:02 | Oxidation behavior study of Si, Ni, and Co dispersed tungsten (W) alloys synthesized via mechanical alloying and consecutive conventional sintering | Mr. VADLA SUMAN |
18:02 | 18:14 | The role of texture in governing the in-vitro bio-corrosion behaviour of Mg-4Zn-0.5Ca-0.8Mn alloy | Ms. Darothi Bairagi |
18:14 | 18:26 | Corrosion Behavior of Friction Stir Processed TRIP Dual-Phase Fe49.5Mn30Co10Cr10C0.5 High Entropy Alloy | Ms. NEELAM MEENA |
18:26 | 18:38 | Effect of Zr and ZrO2 on Aqueous Corrosion Behaviour of Oxide Dispersion Strengthened 9Cr Ferritic-Martensitic Steels | Mr. Nischay Kaushik Garikapati |
Session I, 15th Nov., 2022 | Modelling and Simulation I |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | Atomistic modelling of segregation effects in Cu-Al alloys: Combined Molecular Dynamics (MD) and Monte Carlo (MC) simulations (Invited) | Prof. M P Gururajan |
11:50 | 12:10 | Investigating the role of stacking fault energy in plasticity: MD simulations in Cu-Al systems (Invited) | Prof Prita Pant |
12:10 | 12:22 | Peierls-Nabarro modeling of twinning dislocations in fcc metals | Mr. Sri Sadgun Reddy Pulagam |
12:22 | 12:34 | Simulation of Martensitic Transformations in Ti and Zr alloys | Dr. Appala Naidu Gandi |
12:34 | 12:46 | Micro-texture evolution in Al-Li alloy during single point incremental forming: Experimental and modeling approaches | Mr. Rahul Rakshit |
12:46 | 12:58 | Phase separation and morphological evolution in bimetallic nanoparticles studied using a phase field model | Mr. Pankaj |
12:58 | 13:10 | A multi-scale model for columnar-to-equiaxed transition in the metal additive manufacturing process | Mr. Swapnil Bhure |
13:10 | 13:22 | Microstructure-property prediction of a Ni-based superalloy: A multiscale study | Mr. Vishal |
13:22 | 13:34 | Modeling the strengthening due to copper rich precipitates in austenitic stainless steel used for high temperature applications | Mr. Sankalp Biswal |
Session II, 15th Nov., 2022 | Modelling and Simulation II |
| |
|
|
|
|
Start time | End time | Topic | By |
14:15 | 14:35 | The convergence of Engineering and Machine Learning: A new paradigm in manufacturing science (Invited) | Prof Asim Tewari |
14:35 | 14:55 | Grain boundary grooving and grain growth: A phase-field study (Invited) | Prof. Rajdip Mukherjee |
14:55 | 15:07 | Creep Curve Modelling of Austenitic Stainless steel 316LN | Mr. Nilesh kumar |
15:07 | 15:19 | A Back Stress Deconvolution Technique for Modelling Low Cycle Fatigue Hysteresis Loops of 316L(N) Stainless Steels | Dr. Abir Bhattacharyya |
15:19 | 15:31 | Prediction of Transformation Temperatures of Ni-Ti-Zr Shape Memory Alloy using Artificial Neural Network | Prof. Sampath Vedamanickam |
15:31 | 15:43 | Sensitivity Analysis of Modified Embedded Atom Method (MEAM) Interatomic Potential | Mr. Ramakrishnan Ragavan |
15:43 | 15:55 | Surrogate approach towards accelerated prediction of microstructure evolution through history-dependent Machine learning models | Mr. Owais Ahmad |
15:55 | 16:07 | Comparison of Double Ellipsoid and Avocado-Shaped Heat Source Models in Gas-Tungsten Arc Welding of Ti-6Al-4V Tailor Welded Blanks | Mr. Subhrajit Chand |
16:07 | 16:19 | Optimisation of biaxial test sample geometry for compression testing | Mr. Ankit Bansal |
Session III, 15th Nov., 2022 | ICME/AI/ML |
| |
|
|
|
|
Start time | End time | Topic | By |
16:30 | 16:50 | Multiscale Modeling of Process-Microstructure-Property Relations in Materials: Approaches and Challenges (Invited) | Prof. Saswata Bhattacharya |
16:50 | 17:10 | Challenges in Modelling Hot Strip Mill Process (Invited) | Dr. Chinta Apparao |
17:10 | 17:30 | An Integrated Computational Materials Engineering Approach for the Development of Ni-base Superalloy Aeroengine Turbine Disc (Invited) | Dr. R Sankarasubramanian |
17:30 | 17:42 | CoSMoR: A model-agnostic interpretation framework to extract exact feature contributions along continuous composition pathways in machine learning models trained for material properties | Mr. Dishant Beniwal |
17:42 | 17:54 | Self-assembling Peptide Discovery: Overcoming Human Bias With Machine Learning | Dr. Rohit Batra |
17:54 | 18:06 | Machine learning based approach for phase prediction in multicomponent ultra-high temperature ceramics | Mr. Rahul Mitra |
18:06 | 18:18 | Macroscale simulation and validation of TIG welding in Ni-based superalloy | Mr. Kritik Saxena |
18:18 | 18:30 | Multiscale modelling of hot rolling of microalloyed steels | Mr. Sandeep Pusuluri |
Session I, 15th Nov., 2022 | Lightweighting and Materials for Next Generation Transportation/Automobiles |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | Invited | Dr Akella Sarma |
11:50 | 12:10 | Digitalization of Product Engineering for Light Weighting (Invited) | Dr Vinay Carpenter |
12:10 | 12:30 | Materials Selection for light-weight design (Invited) | Prof. Raghu Prakash |
12:30 | 12:55 | Mini Panel | |
12:55 | 13:07 | Effect of Al and Nb Variations on ?- TiAl alloys Solidification Route | Mr. Trideep Banerjee |
13:07 | 13:19 | Role of defects on room temperature compressive properties of Al-9.4Si-0.5Mg/20% SiCP foams with varied densities | Dr. Ravi Kumar Nadella |
13:19 | 13:31 | Development of high temperature performance Al-Ce alloys for automotive sector | Dr. Paparao Mondi |
Session II, 15th Nov., 2022 | Industry 4.0 |
| |
|
|
|
|
Start time | End time | Topic | By |
14:15 | 14:35 | Industry 4.0 Technologies - A Transformation Driver in Steel Industry (Invited) | Dr. Jose Martin Korath |
14:35 | 14:55 | Remote Operation & Control – Achieving Business Agility and Talent Mobility (Invited) | Mr. Indrajit Paul |
14:55 | 15:15 | Knowledge-driven process operations (Invited) | Dr. Chetan Malhotra |
15:15 | 15:27 | Improving safety and productivity through technological intervention | Mr. Pankaj Kumar Pandey |
15:27 | 15:39 | Digitalization of raceway conditions at tuyere level in blast furnace | Mr. Sagnik Chowdhury |
15:39 | 15:51 | Pursing Digital Transformation and Innovation at ISP | Mr. Ravi Shankar Pandey |
15:51 | 16:03 | Industry 4.0 | Mr. Debasish Ghosh |
16:03 | 16:15 | Efficient Method of Suggesting Alternate Grades using Machine Learning for Steelmaking Plant | Mr. Rishabh Singh |
Session III, 15th Nov., 2022 | Non-Ferrous Materials I: Titanium Alloys and Superalloys |
| |
|
|
|
|
Start time | End time | Topic | By |
16:30 | 16:50 | Processing of Titanium Alloys- A reminiscence (Invited) | Dr. Bhanu Pant |
16:50 | 17:10 | Role of variations in Al and Nb on Solidification path, Phase stability and Mechanical properties of γ-TiAl based alloys (Invited) | Prof. Sujoy Kar |
17:10 | 17:30 | Superalloys in long and short life engines: selection, performance and trends (Invited) | Dr. Swati Biswas |
17:30 | 17:50 | Development of Advanced Aero Gas Turbine Castings and Ni Based Superalloys (Invited) | Mr. Dibyendu Chatterjee |
17:50 | 18:02 | Microstructure and mechanical properties of Ti-43Al-5Nb-0.2W-1B-2Cr Gamma-TiAl alloy in different heat treatment condition | Dr. S Banumathy |
18:02 | 18:14 | Creep Feed Grinding of Nickel base Single Crystal Superalloy | Mr. ALOK SINGH CHAUHAN |
18:14 | 18:26 | Development of thin alumina shell mould for casting of single crystal gas turbine components | Dr. VENKAT YAKATPURE |
18:26 | 18:38 | Recrystallization behavior of select Beta-titanium alloy in two phase condition | Mr. VIVEK KUMAR CHANDRAVANSHI |
Session I, 15th Nov., 2022 | Mineral Processing & Beneficiation I |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | Current Trends and Future Needs for Iron Ore Processing and Beneficiation (Invited) | Shri S.K.Chaurasia |
11:50 | 12:10 | Hydrometallurgical processing of rare earth resources for value addition (Invited) | Dr.D.K. Singh |
12:10 | 12:30 | Performance of Multi-Component Particulate System in Mineral Separators- Towards Understanding Particle Separation Mechanism (Invited) | Prof. M. Narasimha |
12:30 | 12:42 | Product Circuit Automation at Lime Plant | Mr. Abhishek Choudhary |
12:42 | 12:54 | Level 2 enabled closed Loop operation at Lime Plant | Mr. Saurabh Nayak |
12:54 | 13:06 | Development of Coke Fines Coating Granulation Process in Commercial Sinter Plant for Improving Productivity | Mr. Naveen Kumar N |
13:06 | 13:18 | Use of additive to Decrease the Viscosity of Coal tar at pellet Plant | Mr. shaik Mahaboob basha |
13:18 | 13:30 | Extraction of Rare Earth Elements from Direct Ores and Process Waste Streams | Ms. Yamini Kannappan |
Session II, 15th Nov., 2022 | Green Production, Sustainability and Circular Economy I |
| |
|
|
|
|
Start time | End time | Topic | By |
14:15 | 14:35 | Hydrogen Reduction of Iron Ore for Green Steel Manufacturing (Invited) | Prof. N B Dhokey |
14:35 | 14:55 | HPPI as an Alternative Material for Fe-alloys used in Steel Plants (Invited) | Dr. P K Tripathy |
14:55 | 15:15 | Use of steel plant waste material for H2 generation for Greener Steel Industry (Invited) | Mr. Arijit Biswas |
15:15 | 15:27 | A novel process for the recovery of high value product from low-grade manganese ore | Mr. Saurabh Shekhar |
15:27 | 15:39 | Reduction of Heat Loss in Reheating Furnace Through Veneering Modules | Mr. Sandeep Singh |
15:39 | 15:51 | Studies on the removal of EVA layer from spent photovoltaic modules | Dr. D S Prasad |
15:51 | 16:03 | Recycling of Hafnium from process Residue of Kroll reduction | Mr. ARBIND KUMAR |
16:03 | 16:15 | Potential of Alkalis in Dissolution of Tantalum- A Novel Approach Towards Recycling of Waste Tantalum Capacitors | Ms. Munmun Agrawal |
16:15 | 16:27 | Utilisation of Coke oven Solid waste in Iron ore sintering | Mr. Suresh V |
16:27 | 16:39 | Waste to Wealth : Replacement of Foundry Sand with Blast Furnace Sludge and Flue dust – enhancement of economy | Dr. Susanta Pramanik |
Session III, 15th Nov., 2022 | Green Production, Sustainability and Circular Economy II |
| |
|
|
|
|
Start time | End time | Topic | By |
16:30 | 16:50 | Decarbonization in iron and steel industry (Invited) | Dr.Lokendra Raj Singh |
16:50 | 17:10 | Green and Sustainable Nuclear Waste Management Program (Invited) | Dr. Pranesh Sengupta |
17:10 | 17:22 | Production of Clean Steel using Floor mounted Slag Retaining Device in Converter | Mr. SOUMAVO PAUL |
17:22 | 17:34 | SYNTHESIS OF ?-ALUMINA POWDER FROM ALUMINIUM CHAFF WASTE MATERIAL | Mr. Paramanand Bairwa |
17:34 | 17:46 | A Novel Process Development for Production of DRI Briquettes from Steel Plant Wastes | Mr. Anil Kumar |
17:46 | 17:58 | Sustaining Production in Single trough Operation by Adjusting Blowing Parameters and Optimizing Casting Practices | Mr. Ravi Shankar |
17:58 | 18:10 | Arsenic Reduction in Electrowon Copper Cathode at Copper Refinery | Mr. Pappulal Dhobi |
18:10 | 18:22 | Fabrication of a Robust Superhydrophobic Stainless Steel Mesh for Efficient Oil/Water Separation | Ms. Revathy Sreekumar |
18:22 | 18:34 | Resource utilization by beneficiation of iron ore tailings | Dr. Barun Harichandran |
Session I, 15th Nov., 2022 | Ultra-High Temperature Materials |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | In Quest of Lighter Thermal Protection Systems (Invited) | Dr. S C Sharma |
11:50 | 12:10 | Development of ‘High-Entropy’ Oxides for Thermal Barrier Coating Applications (Invited) | Prof. Asutosh Gandhi |
12:10 | 12:30 | Length scales effects and strengthening characteristics of refractory high/medium entropy alloys (Invited) | Prof Koteswara Rao V Rajulapati |
12:30 | 12:42 | Processing of Carbon-Fiber Reinforced SiC Matrix Composite: Pressure and Electric Field Assisted Sintering Approach | Dr. Soupitak Pal |
12:42 | 12:54 | Challenges in Preparation and Processing of Niobium Based Alloys | Dr. M SANKAR |
12:54 | 13:06 | Boron modified cyclotrisilazane as oxidation protection coating for long-term high temperature ceramic matrix composites | Dr. Ganesh Babu T |
13:06 | 13:18 | Filler free Joining of HfB2-SiC and ZrB2-SiC based composites | Dr. Shipra Bajpai |
13:18 | 13:30 | High enthalpy shock wave interaction of ZrB2 based ultra high temperature ceramics | Mr. Vishrant Dave |
Session II, 15th Nov., 2022 | Correlative Microscopy |
| |
|
|
|
|
Start time | End time | Topic | By |
14:15 | 14:35 | Correlative Analysis of APT/TEM for MgNiY Long Period Stacking Ordered Structure (Invited) | Dr. Yimeng Chen |
14:35 | 14:55 | Co-evolution of point defects and Cr-rich nano-phase in binary Fe-20 at.% Cr alloy: correlating positron annihilation spectroscopy with atom probe | Dr. Aniruddha Biswas |
14:55 | 15:15 | Nanoarchitectonics of self-assembled chessboard-like structures in spinel forming CoFeMn oxide through correlative electron microscopy (Invited) | Dr. Joysurya Basu |
15:15 | 15:35 | Understanding of microstructural behavior of multicomponent alloys using correlative microscopy (Invited) | Dr. Surendra Makineni |
15:35 | 15:47 | Quantitative analysis of nano-scale Cr-rich phase separation in thermally aged binary Fe-Cr alloys: a correlative APT, TEM and SANS study | Dr. Sudip Kumar Sarkar |
15:47 | 15:59 | 3D Atomic Scale Characterization of Cold Sprayed and Heat-Treated Inconel 718 | Mrs. Milan Shahana S |
15:59 | 16:11 | Temporal evolution of nanoprecipiates in an additively manufactured maraging steel using a correlative microscopic approach | Dr. SADHASIVAM M |
16:11 | 16:23 | Effect of in situ oxide nanodispersoids on thermal stability, hardness, and material degradation of high entropy alloys | Mr. Rahul Bhattacharya |
Session III, 15th Nov., 2022 | High Entropy Materials I |
| |
|
|
|
|
Start time | End time | Topic | By |
16:30 | 16:50 | Combinatorial instrumented micro-indentation and EBSD investigation to decipher elastoplastic anisotropy in non-equiatomic MoNbTaVW refractory high entropy alloy (Invited) | Dr. Nilesh P Gurao |
16:50 | 17:10 | Thermal stability, strengthening and deformation behaviour of high entropy alloys (Invited) | Prof. Ravishankar Kottada |
17:10 | 17:22 | Compositional design and experimental validation of Nb-Ta-Ti-Zr Immiscible Refractory High-Entropy alloys | Mr. GUNTI SHIVA |
17:22 | 17:34 | Ternary concentrated refractory alloy system with exceptional density-normalized hardness | Mr. Deekshith Kalali |
17:34 | 17:46 | Creep behavior of wrought Al0.2CoCrFeNiMo0.5 high entropy alloy | Mr. YASAM PALGUNA |
17:46 | 17:58 | EXPLORING HEAs USING ARTIFICIAL INTELLIGENCE | Dr. PRASADA RAO A.K. |
17:58 | 18:10 | Synthesis and Characterization of Multicomponent Gamma Brass- type High Entropy Alloys | Mr. RITIK ROSHAN TRIPATHY |
18:10 | 18:22 | Deformation and Recrystallization Textures of Extremely Low Stacking Fault Energy High Entropy Alloys | Mr. Suvra Paul |
18:22 | 18:34 | Heterogeneous Microstructure in Refractory High Entropy Alloy after High Pressure Torsion: Evolution Mechanisms and Mechanical Properties | Mr. ABHEEPSIT RATURI |
Session I, 15th Nov., 2022 | Materials Characterization I |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | Correlative atomic-scale analysis of nano-scale precipitate evolution and localization in Ni alloyed Fe-Mn-Al-C steel (Invited) | Prof. K G Pradeep |
11:50 | 12:02 | Microstructural study of oxygen irradiated V-4Cr-4Ti containing pre-existing defects, using XRD, EBSD and Ab Initio calculation | Dr. SANTU DEY |
12:02 | 12:14 | Gas Atomized iron phosphide powder for Wear Resistance Coating | Dr. Tapan Kumar Rout |
12:14 | 12:26 | Thickness-dependent electronic and magnetic states of Mn and Co atoms at Mn-rich Co2Mn1.20Ge0.38/MgO interfaces via soft x-ray magnetic circular dichroism | Prof. Vijay Raj Singh |
12:26 | 12:38 | Microstructure, texture, and mechanical properties of Mg and its alloy during grain growth | Dr. SANTOSH SAHOO |
12:38 | 12:50 | Structure-Property Correlation of Metastable Beta Titanium Alloy Ti-5Al-5Mo-5V-3Cr | Dr. Premkumar Manda |
12:50 | 13:02 | Investigation of metallurgical properties of Zircaloy-4 cladding subjected to out-of-pile LOCA Integral test | Ms. Saee Jagtap |
13:02 | 13:14 | Phase Transformation Studies in Gleeble 3500C Thermo-mechanical Simulator Using a Novel Improvised Setup | Mr. Kartik Nageswaran |
13:14 | 13:26 | Effect of Annealing Temperature on Microstructure and Properties of Continues Galvanized Cold Rolled Plain C-Mn High Strength Steel | Mr. Harsh Kotadiya |
13:26 | 13:38 | Effect of pilgering on hydride orientation in Zr-2.5% Nb Alloy pressure tubes for PHWRs | Mr. Raman Kumar |
Session II, 15th Nov., 2022 | Materials for Advanced Battery I |
| |
|
|
|
|
Start time | End time | Topic | By |
14:15 | 14:35 | Electro-Organic Chemistry to Restore the Lost Capacity in Flow Battery (Invited) | Prof. Kothandaraman R |
14:35 | 14:55 | Sodium vanadium phosphate (NVP) as a cathode for Na-ion battery: Approach and methodology (Invited) | Dr. B B Kale |
14:55 | 15:15 | Advanced material for electrical energy storage use (Invited) | Mr. K. S. Ramanujan |
15:15 | 15:27 | Development of high tap density C-LFP using low cost iron precursors for High Energy Li-ion battery applications | Mrs. Chandra Gowthami |
15:27 | 15:39 | Designing ‘Aqueous Processed’ O3-type Transition Metal Oxide Cathodes Enabling Long-Term Cyclic Stability for Na-ion Batteries | Mr. Bachu Sravan Kumar |
15:39 | 15:51 | Temperature-controlled synthesis of P2 and P3 type Mg doped Na2/3Mn2/3Ni1/3O2 cathodes via microwave-assisted sol-gel route for high-performance sodium-ion battery | Mr. Venkatesh Manchala |
15:51 | 16:03 | Investigation of Sulfate-based Polyanionic Battery Insertion Materials | Ms. Sridivya Chintha |
16:03 | 16:15 | The application-driven slurry preparation process for lithium-ion battery electrode preparation and a parametric optimization for the fabrication of 500mAh lithium-ion pouch cell. | Mr. Mahender Peddi |
Session III, 15th Nov., 2022 | Materials Characterization II |
| |
|
|
|
|
Start time | End time | Topic | By |
16:30 | 16:50 | Characterization of phase separation behaviour in Ag-Cu nanostructures fabricated by FIB milling of sputtered thin films (Invited) | Dr. Subhradeep Chatterjee |
16:50 | 17:10 | The Talos F200: achieving high throughput and reproducible STEM and TEM imaging, diffraction and EDS results (Invited) | Dr. Alex Bright |
17:10 | 17:30 | Study on evolution of an intermetallic phase in a W-Ni-Co alloy (Invited) | Dr. Rajdeep Sarkar |
17:30 | 17:42 | Microstructure-property correlation and wear behavior of nano-TiN reinforced aluminium metal matrix composite | Mr. Md Imran Rizwi |
17:42 | 17:54 | Characterization & properties evaluation of tungsten powder prepared by recycling of tungsten based heavy alloy scrap | Dr. Ravi Kiran |
17:54 | 18:06 | Microstructural and Mechanical Characterization of y-TiAl alloy for high temperature application | Mr. Sai Madhav Mamidanna |
18:06 | 18:18 | Tribological behaviour of Copper-Graphene surface composite via green technology Friction Stir Processing | Dr. Ramavath Bheekya Naik |
18:18 | 18:30 | Assessment of Stress-controlled Fatigue Behaviour of a Weather Resistant Rail Steel | Dr. Partha Pratim Sarkar |
Session I, 15th Nov., 2022 | Thermomechanical Processing I |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | Analysis of hot deformation behaviour– in the presence of two phases and microstructure gradient (Invited) | Prof. Vivek Pancholi |
11:50 | 12:02 | Thermomechanical Processing and Microstructural Evolution of a Wrought Nickel Based Superalloy | S S Satheesh Kumar |
12:02 | 12:14 | Metallurgical Analysis to minimize breakage during drawing of LCWR | Vikas Solanki |
12:14 | 12:26 | Effect of partitioning time on stretch-flange-formability of quenched and partitioned steel | Chintada Umasank ar |
12:26 | 12:38 | Development of New Process Route for Zirconium Alloy Components employing Forging as Primary Hot Working Operation | Swarup Acharya |
12:38 | 12:50 | Micrometer scale structure-property correlation during thermomechanical processing of AHSS steels | S. Janakiram |
12:50 | 13:02 | A novel hot rolling strategy to produce uniform ferrite grain structure in commercially produced plates of 409L | Ajay Mishra |
13:02 | 13:14 | Optimization of composition and Rolling parameters for improvement in Mechanical Property of plates | Sonu kumar Gond |
13:14 | 13:26 | Enhancement in mechanical properties of tungsten heavy alloy using thermomechanical treatments | Ashutosh Panchal |
Session II, 15th Nov., 2022 | Advanced Materials Processing and Characterization |
| |
|
|
|
|
Start time | End time | Topic | By |
14:15 | 14:35 | Numerical simulation of the interaction between VIM furnace and directional solidification process and numerical simulation of the cold wall crucible technique (Invited) | Dr. Samuel Bogner |
14:35 | 14:55 | Advanced Microscopy solutions for emerging technologies (Invited) | Carl Zeiss |
14:55 | 15:15 | Chemical Characterization of Metallurgical Samples: An Overview (Invited) | Dr. SS Kalyan Kamal |
15:15 | 15:27 | Design, Development and Forming Feasibility of 1.2 GPA UHSS sheet | Rohit singh |
15:27 | 15:39 | Future is Vacuum | Amit Jawade |
15:39 | 15:51 | Innovative Briquetting Technology: High Pressure Vacuum Extrusion | Mr. Chandra Shekhar Verma |
15:51 | 16:03 | High Density Copper Single Atom Catalyst on Graphitic Carbon Nitride for Multifunctional Applications | Mrs. SUJA P |
Abstarct
i) 'SHRUTHI -KRITHI -An ensemble of Indian Traditions'
by Unicent School students, Nagole, Hyderabad : 30 mins (19:30 - 20:00)
ii) Dhrupad SAROD at its Best
by Mr Debanjan Bhattacharjee (in Sarod) & Mr Arijit Saha (in Tabla), Kolkata : 90 mins (20:00 hrs - 21:30 hrs)
Abstarct
Session IV, 16th Nov., 2022 | Ferrous Materials 4 |
| |
|
|
|
|
Start time | End time | Topic | By |
09:00 | 09:12 | Modernization & Automation system for Slitting Line-II and Sheet Shearing Line-III at CRM, BSL | Mr. Chandan Kumar |
09:12 | 09:24 | A novel clogging prevention system for pre-scrubber of Gas Cleaning Plant by high-pressure water jets | Mr. S THIRUMALAI SELVAM |
09:24 | 09:36 | Investigation of thermal and hydraulic regime for higher throughput of CDCP plant | Dr. Praveen Jha |
09:36 | 09:48 | EFFECT OF BALLING INDEX IMPROVEMENT ON IRON ORE SINTERING | Mr. SUBHRA DHARA |
09:48 | 10:00 | Effects of induction heating and furnace heating on microstructural and mechanical properties of SAE 9254 spring steel | Mr. Nanda Kishore Karnam |
10:00 | 10:12 | Advancements in Refractory lining of Blast Furnace Tuyere Stocks at Visakhapatnam Steel Plant | Mr. RAMESH BABU PENUMALA |
10:12 | 10:24 | An Innovative Desulphurization Solution by JAMIPOL to Eliminate Magnesium | Mr. Raj Kumar Yadav |
10:24 | 10:36 | Optimization of Dynamic soft reduction parameters in twin strand conventional slab caster | Mr. POOMALAI P |
10:36 | 10:48 | Automation of Sampling of Bulk Ferroalloys in a Steel Plant | Mr. Kamalesh Prasad Maurya |
|
|
|
|
Session V, 16th Nov., 2022 | Ferrous Materials 5 |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:42 | Improved Productivity and Tool Life of H13 Steel for Hot Extrusion Dies Through Gas Nitriding | Dr. SANDEEP BUTEE |
11:42 | 11:54 | Metallurgical Design of Steel for Iron Ore Slurry Pipe Line considering Performance and Erosion/ Corrosion Life | Mr. Venkata Ramana Gunnabathula |
11:54 | 12:06 | Failure Analysis of a Balancing Piston Rod of the Bottom Work Roll, of the Roughing mill of a Hot Strip Mill | Mr. Piyas Palit |
12:06 | 12:18 | Optimizing Gas Profile inside the Blast Furnace using Digital Dash Board for Real Time Visualization & Control of Stave Temperatures & Tuyere Profile | Mr. K Naveen Singh |
12:18 | 12:30 | Global alternate ferrochrome production routes | Dr. ch sambasiva rao chagantipati |
12:30 | 12:42 | The Role of Slag Carryover on the Non-Metallic Inclusion Evolution and Magnetic Behaviour in Electrical Steel | Dr. Ashok Kamaraj |
12:42 | 12:54 | STUDY OF CLOGGING DURING CASTING OF HIGH MANGANESE RE-PHOSPHORIUZED ULTRA LOW CARBON GRADES | Ms. Ruchira Tripathy |
12:54 | 13:06 | WASTE HEAT UTILIZATION IN STEEL PLANT - A CASE STUDY | Dr. Sudeb Dutta |
13:06 | 13:18 | Investigation on the Pyroxene and Magnesite Wastes Addition as Partial Investigation on the Pyroxene and Magnesite Wastes Addition as Partial | Dr. Golap Md. Chowdhury |
Session IV, 16th Nov., 2022 | Mechanical Behaviour II |
| |
|
|
|
|
Start time | End time | Topic | By |
09:00 | 09:20 | Yield Locus and Microstructural evolution of AA 7475 aluminum alloy at elevated temperature under Multi-axial Loading (Invited) | Prof. Sushil Mishra |
09:20 | 09:40 | Implications of thermal stability on creep behavior of nanocrystalline materials: An analytical approach (Invited) | Prof. G Srikant |
09:40 | 10:00 | Probabilistic assessment of variability in fatigue life in a near α titanium alloy (Invited) | Dr. Kartik Prasad |
10:00 | 10:12 | Ultrafine ferrite grain formation in W-modified 9-Cr steel and its effects on mechanical properties | Mr. Mantosh Mandal |
10:12 | 10:24 | Effect of Notch Geometry on Notch Tensile Properties of Ti6Al4V ELI at Ambient and Cryogenic Temperatures | Mr. ARUN KRISHNA |
10:24 | 10:36 | Cyclic Elasto-plastic Response of the Notched Alloy 617M | Mr. J Veerababu |
10:36 | 10:48 | EFFECT OF WELD GROOVE ANGLE ON LOW CYCLE FATIGUE AND CREEP FATIGUE INTERACTION BEHAVIOUR OF GRADE 91 | Mr. Rakesh Mourya |
10:48 | 11:00 | Effect of homogenization treatment on ultrasonic quality and creep rupture behaviour of high strength nickel based superalloy | Mr. VAMSI KRISHNA PARIMI |
11:00 | 11:12 | The synchronous improvement of strength and plasticity of a DS alloy | Dr. Rajesh Kumar Rai |
11:12 | 11:14 | Evolution of Microstructure and Mechanical Properties of LPBF processed Mar-M 509 after Shot-cycle heat Treatment | Dr. Bikash Kumar |
Session V, 16th Nov., 2022 | Advanced Functional Materials |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | Development of Advanced Functional Thin films for Futuristic Defence Applications (Invited) | Dr. M Manivel Raja |
11:50 | 12:10 | Development Of SiC Single Crystals For Electronic Applications – An Overview (Invited) | Mr. Soumya Deb |
12:10 | 12:30 | Large Area Pulsed LASER Deposition (PLD) in DMRL and its Applications (Invited) | Dr. A R James |
12:30 | 12:42 | Development of S-band sever button and low loss button based on AlN-SiC ceramic composites for high power microwave applications | Dr. Subir Roy |
12:42 | 12:54 | Silicon carbide bulk Single crystal growth (4”dia., 4H-polytype) for High Frequency & High Power Devices | Dr. O.P. Thakur |
12:54 | 13:06 | Germanium based Materials with metallic contamination and impurities and A predictive analytics framework of metal ontologies and material rationalization | Mr. Venkata Surya Brahma Linga Sarma Somina |
13:06 | 13:18 | Defect-induced band-gap engineering and magnetism in non-magnetic metal oxide (MgO) nanoflakes derived by precipitation method for photocatalytic applications | Dr. Vasundhara Mutta |
13:18 | 13:30 | Electrical and Mechanical Properties of (1-x) PVDF–(x) PLZT Composite thick films | Dr. Paramjit Kour |
Session IV, 16th Nov., 2022 | Additive Manufacturing II |
| |
|
|
|
|
Start time | End time | Topic | By |
09:00 | 09:20 | Metal Additive Manufacturing for Space Applications (Invited) | Dr. V Anil Kumar |
09:20 | 09:40 | Laser Beam Powder Bed Fusion: Alloy Powders and Applications (Invited) | Dr. Gururaj Telsang |
09:40 | 10:00 | Additive Manufacturing of Metallic Components for Strategic Applications (Invited) | Mr. Ramesh Kumar Saride |
10:00 | 10:12 | Effect of Heat Treatments on Microstructure and Mechanical Properties of Laser Powder Bed Fusion A205 | Dr. Anup Kulkarni |
10:12 | 10:24 | Microstructural Characterization of powder-bed fusion processed Nickel based superalloy CM247LC | Ms. Aparna Krishna Munjuluri |
10:24 | 10:36 | Development and characterization of 316 L stainless steel/inconel 718 functionally graded material fabricated by laser metal direct energy | Mr. Abhishek Tiwari |
10:36 | 10:48 | Effect of Heat Treatments on the Structure – Properties of Laser Powder Bed Fusion Inconel 939 Alloy | Dr. Nandha Kumar Eswaramoorthy |
10:48 | 11:00 | An integrated process-structure-property framework for in-silico design of additively manufactured 18Ni-300 maraging steels | Mr. Surya Ardham |
11:00 | 11:12 | Metallurgical and mechanical properties evaluation of the WAAM deposited Inconel 625 alloy | Dr. Ravi Vidyarthy |
11:12 | 11:24 | Parametric study and microstructure evolution of laser melted binary alloy with addition of NP | Dr. Sukla Mondol |
Session V, 16th Nov., 2022 | Physical Metallurgy of Steel |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | Quenching and partitioning (Q&P): A novel process for producing advanced high strength steels (Invited) | Prof. S Sankaran |
11:50 | 12:10 | Austenite and ferrite grain size variation in microalloyed steels (Invited) | Prof. Debalay Chakrabarti |
12:10 | 12:22 | Development high nitrogen steels for armour applications | Dr. B Bhav Singh |
12:22 | 12:34 | Development of Double Side Stainless Steel Cladded Carbon Steel Plate through Hot Roll Bonding | Mr. Laxya Gupta |
12:34 | 12:46 | Development of austenite based low density steel for armour application | Mr. Bidyapati Mishra |
12:46 | 12:58 | Decomposition of ferrite and pearlite mixture during continuous heating : Dilatometric analysi | Mr. PONGURU SENTHIL P |
12:58 | 13:10 | Effect of hot rolling and ageing parameters on the structure and properties of tungsten containing maraging steel | Dr. U.Savitha |
13:10 | 13:22 | Study of Bend Cracks due to non-metallic inclusion in High strength Structural steel and the effect of Calcium | Mr. Sarath Nair |
13:22 | 13:34 | Effect of Secondary Melting route on the mechanical properties of austenitic stainless steel 321 at room temperature, 77K and 20K | Mr. Sandipan Das |
Session IV, 16th Nov., 2022 | Damage, Material Degradation and Life Assessment and Non Destructive Evaluation Techniques |
| |
|
|
|
|
Start time | End time | Topic | By |
09:00 | 09:20 | NDE techniques for characterization of damage/defects for life assessment of components (Invited) | Dr. Sony Punnose |
09:20 | 09:32 | Corrosion Fatigue Crack Propagation in DMR249A Steel Welds in Simulated Sea Water for different R ratios | Dr. SWATI ACHARYYA |
09:32 | 09:44 | Introduction of Laser Doppler Velocimeter for Plate Length measurement | Mr. MALLARAPU SHRUJAN |
09:44 | 09:56 | A Study on the effect of laser shock peening on the near-surface microstructure and mechanical properties of solution annealed IN718 | Dr. M Phani Surya Kiran |
09:56 | 10:08 | Causes of Cracking in Hot Rolled Fully Pearlitic Steel during Slitting | Mr. Basavaraj Kalinganavar |
10:08 | 10:20 | Cracking of Nut of Blade Fork Screw at Main Rotor Blade Attachment Point of a Helicopter | Ms. Vaisakhi Nandi |
10:20 | 10:32 | A micromechanics based approach to predict the safe life of DP steel component subjected to fatigue | Mr. Srimannarayana Pusuluri |
10:32 | 10:44 | Root cause analysis of Sliver defect in hot rolled coil of low carbon Al-killed steel produced through thin slab casting and rolling. | Ms. Ayushi Bhandari |
10:44 | 10:56 | Continuum Damage Mechanics Approach for Evaluation of Creep Damage in a Directionally Solidified Ni-based Superalloy | Mr. CM OMPRAKASH |
10:56 | 11:08 | Failure of Buried GFRP Pipeline during Hydro test | Mr. Souvik Das |
Session V, 16th Nov., 2022 | Failure Analysis |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:42 | Failure Analysis of Spillway gate failure of a Hydro Project | Mr. Prahlad Halder |
11:42 | 11:54 | Ladle Furnace Steel Car Gear Box Failure: A Metallurgical Perspective | Ms. Nandita Kayal |
11:54 | 12:06 | Failure Analysis of the Drive-end Pulley Shaft of a Triple Conveyor: a Fatigue Failure | Ms. Kuppili Padma Sri |
12:06 | 12:18 | Failure Analysis of Drive – end and Non – drive end Bearings of Down Coiler Ball Table at a Hot Strip Mill of an Integrated Steel Plant | Mr. PRABHASH GOKARN |
12:18 | 12:30 | Corrosion Related Failures in Defence Systems: Role of Material Selection | Mr. Mrityunjoy Hazra |
12:30 | 12:42 | AIRWORTHINESS CERTIFICATION OF SOFTMAGENTIC MATERIAL SOFTCOMG 49AA (HOT ROLLED BARS & COLD ROLLED STRIPS) FOR ACTUATORS FOR AIRBORNE APPLICATIONS | Mr. Deepjyoti A Shelwatkar |
12:42 | 12:54 | Failure analysis of carbon steel elbow joint operating at high temperature and pressure | Mr. Raman Saini |
12:54 | 13:06 | Metallurgical analysis of cracked Aluminium alloy AA 2014 bracket used in aerospace application | Mr. Santhoshkumar R |
13:06 | 13:18 | Progressive failure analysis of FRP composites with manufacturing defects by Puck failure criteria | Mr. Pritam Kulkarni |
Session IV, 16th Nov., 2022 | Modelling and Simulation III |
| |
|
|
|
|
Start time | End time | Topic | By |
09:00 | 09:20 | MicroSim: An indigenous phase-field software for microstructure simulations (Invited) | Prof. Abhik Chowdhury |
09:20 | 09:40 | A Two-Scale Model for Hot Isostatic Pressing (HIP)- (Invited) | Dr. Pritam Chakraborty |
09:40 | 09:52 | Effect of solute distribution on screw dislocation motion in bcc Fe-based systems | Mr. Rakesh Barik |
09:52 | 10:04 | Experimentally Informed Crystal Plasticity Model for Predicting the Deformation of a Polycrystalline Ni-based Superalloy | Ms. Suketaben Amrutbhai Chaudhary |
10:04 | 10:16 | Molecular Dynamics Study on the Effect of Nano-Structuring on the Mechanical Properties of Pure Zr and Zr-2.5 Wt.%Nb Alloys | Mrs. Satadipa Banerjee |
10:16 | 10:28 | Revisiting Glass forming ability in binary metallic glasses | Dr. Pratik Ray |
10:28 | 10:40 | Oxygen and silicon self-diffusion in SiO2 scale formed on ultra-high temperature ceramics | Ms. Jhalak |
10:40 | 10:52 | Thermal efficiency of a double walled high pressure gas turbine blade– a FEM based analysis | Dr. B Srivathsa |
10:52 | 11:04 | Comparison of Pulsed arc and Constant current arc effects in GTAW under different shielding gases using FEM approach | Mr. Chitranjan Kumar Jha |
11:04 | 11:16 | A Graphical User Interface for Industrial Case Hardening of Steel | Mr. Ayush Badaya |
Session V, 16th Nov., 2022 | Modelling and Simulation IV |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | Generative AI and Computational Multiscale-Multiprocess Models for Option Space Exploration of Industrial Manufacturing Processes (Invited) | Dr. B.P. Gautham |
11:50 | 12:10 | Digital Twins for Accelerated Development of Materials (Invited) | Prof. A K Singh |
12:10 | 12:22 | Modelling of the energy optimizing furnace-steel making process | Mr. Vidhyasagar M |
12:22 | 12:34 | Modelling and experimental studies of impact and shock loading behaviour of aluminium foam | Dr. Shiba Narayan Sahu |
12:34 | 12:46 | Mathematical modelling and simulation of heat transfer phenomena in an annular cooler of iron ore sintering process | Mr. Seenivasan R |
12:46 | 12:58 | Influence of Electromagnetic Stirrer Parameters on Solidification and Interface Behaivour In Continuous Casting Mold | Mr. Vipul Kumar Gupta |
12:58 | 13:10 | Mitigation of Flame failure in a Power Plant using Machine Learning | Mr. B SAI PRAKASH |
13:10 | 13:22 | Reinforcement Learning Based Simulation Framework For New Product Development in Steel Manufacturing | Mr. Sudipto Trivedy |
13:22 | 13:34 | A practical tundish grade intermixing model: development and verification with CFD simulations | Mr. Pratikkumar Jambucha |
Session IV, 16th Nov., 2022 | Non-Ferrous Materials II |
| |
|
|
|
|
Start time | End time | Topic | By |
09:00 | 09:20 | Establishing the mechanism of degradation of Ferritic/-Martensitic Steels in Lead Lithium Eutectic to be used for Fusion Energy Applications (Invited) | Dr. R Tewari |
09:20 | 09:40 | Invited | Dr. Chandan Mondal |
09:40 | 09:52 | Processing of Magnesium Master Alloys - Limitations and Opportunities in INDIA. | Dr. K K Ajith Kumar |
09:52 | 10:04 | Aluminium - Cerium based alloys for high temperature applications | Dr. Animesh Mandal |
10:04 | 10:16 | OPERATION EXCELLENCE IN POTLINES OF ALUMINIUM SMELTERS | Mr. DEBANANDA BHATTACHARYYA |
10:16 | 10:28 | Efficiency Improvement in copper smelting in Flash Smelting Furnace | Mr. Yogesh Patel |
10:28 | 10:40 | Effect of extended quench delay on mechanical property and corrosion characteristics of AA2219-T6 fabricated components | Mr. Saravanan Palanisamy |
10:40 | 10:52 | An implementation of a Two-Crop Cycle in Copper Electro-Refining Process at Birla Copper Dahej | Mr. Vikas Chandra Vaishya |
10:52 | 11:04 | Treatment of Copper Bearing Flue Dust During Copper Smelting in Mitsubishi Furnace | Mr. Yudhveer singh |
11:04 | 11:16 | Effect of Borides of AlB master alloy in the reduction of tramp elements to make conductor grade aluminum alloy | Dr. PALLAVI DESHMUKH |
Session V, 16th Nov., 2022 | Thermomechanical Processing II |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | Thermomechanical processing scheme to achieve superplasticity in a bulk titanium alloy (Invited) | Dr. I Balasundar |
11:50 | 12:02 | Effect of ausforming on the kinetics and characteristics of Nano-structured Bainite | Khushboo Rakha |
12:02 | 12:14 | Effect of phase transformation and recrystallization behavior on tensile properties in Ni modified medium manganese steel | Suman Kumar |
12:14 | 12:26 | An improvement in creep properties of India specific reduced activation ferritic martensitic steel by tailoring microstructural features through thermomechanical treatment | P. Anil Kumar |
12:26 | 12:38 | Development of Ni-Mo-Cr-Ti alloy forged & Hot rolled bars for high temperature corrosion application | Santanu Saha |
12:38 | 12:50 | A Novel Approach towards Understanding Static Recrystallization Behavior of a Cu-Bearing Low Carbon High Strength Low Alloy (HSLA) Steel | Deepayan Roy |
12:50 | 13:02 | Hot Deformation Behaviour of Nickel Base Superalloy Ni-24Cr-14W-0.5Ti: A study using processing maps | Dr. Randhir Singh |
13:02 | 13:14 | Novel Process Development for Manufacturing of Large ID shell of Maraging Steel by Hot Expansion process | Chetan Katakam |
13:14 | 13:26 | Prediction of microstructure and mechanical properties during hot rolling process through recrystallisation studies | Amarjeet Kumar Singh |
Session IV, 16th Nov., 2022 | Mineral Processing & Beneficiation II |
| |
|
|
|
|
Start time | End time | Topic | By |
09:00 | 09:20 | Recovery of rare earths from waste resources: Three different case studies (Invited) | Prof. Chenna Rao Borra |
09:20 | 09:40 | A Prelude to the Concentration of Platinum Group of Minerals from the Low-grade Indian Deposits (Invited) | Dr. Shivakumar Angadi |
09:40 | 10:00 | Processing of atomic minerals (Invited) | Shri Anuttam Mishra |
10:00 | 10:12 | Minimizing the Irregularities in Blast Furnace by improving the Burden Distribution with the help of Mathematical Burden Distribution. | Mr. BHAGYARAJ D |
10:12 | 10:24 | Effect of particle size of fluxing agents on the properties of iron ore pellets | Mr. Ravindra Kumar |
10:24 | 10:36 | Studies on the effect of feed acidity on the distribution coefficients of Hf and Zr in Solvent Extraction | Dr. Raghu C Reddy |
10:36 | 10:48 | Facilitating the blending of coal through utilization of spillage bunker at CokeOven | Mr. Antariksh Gupta |
10:48 | 11:00 | Strategies and Way Forward for the Utilization of Low-grade Indian Ilmenite Concentrates | Mr. DEEPAK NAYAK |
11:00 | 11:12 | Challenges during scaling up the Pelletization Process of Goethetic-Hematite Iron Ore | Mr. Deepak Kumar Sahu |
Session V, 16th Nov., 2022 | Green Production, Sustainability and Circular Economy III |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | Mi.DA® – Deep into the Green (Invited) | Mr. Abhisek Bhadra |
11:50 | 12:02 | Recovery of Metals and Reduction of Solid Waste from Refinery Effluents | Mr L Viswamsetty |
12:02 | 12:14 | RECENT ADVANCEMENTS IN RAW MATERIALS PREPARATIONS – MICRO PELLETIZING AND BRIQUETTING | Mr. DHIRENDRA PRASAD |
12:14 | 12:26 | Vortex Killer: Extracting value through waste | Ms. P N Shivangi |
12:26 | 12:38 | STORAGE AND UTILISATION OF BYPRODUCT GASES IN STEEL PLANT - A STEP TOWARDS SUSTAINABILITY | Mr. Saikat Chakraborty |
12:38 | 12:50 | Recovery of palladium from multi-layer ceramic capacitors (MLCC) of obsolete printed circuit boards (PCB) | Dr. YELLARESWARA RAO KOSURI |
12:50 | 13:02 | Coal and Coke Carbonization Factors Impacting the Generation of Thiocyanate and Phenol in Coke Plant Wastewater Through Machine Learning Techniques | Ms. Pranali Borkar |
13:02 | 13:14 | Sustainable Production of Green and Clean Steel by Hydrogen Plasma Smelting Reduction Technique | Dr. Pravas Ranjan Behera |
13:14 | 13:26 | Recovery of valuable Rare Earths (Nd, Pr & Dy) from spent NdFeB based Permanent Magnets under circular economy | Dr. Urlagaddala Rambabu |
13:26 | 13:38 | Utilization of Dolochar in Iron ore sinter making | Dr. Vibhuti Roshan |
Session IV, 16th Nov., 2022 | Rare Earth Permanent Magnets |
| |
|
|
|
|
Start time | End time | Topic | By |
09:00 | 09:20 | Strategies, Possibilities and Challenges for NdFeB Magnet Manufacturing in India (Invited) | Dr. Gaurav Shukla |
09:20 | 09:40 | Effect of alloy composition on thermal stability of Nd2Fe14B and Sm2Co17 type Rare-Earth Permanent Magnets (Invited) | Dr. Ranjan Kumar Singh |
09:40 | 10:00 | Coercivity enhancement through grain boundary engineering (Invited) | Dr. D. Prabhu |
10:00 | 10:20 | Mini Panel |
|
10:20 | 10:32 | Recycling of Scrap Sm2Co17-type Magnets Using Cryo-milling and Spark Plasma Sintering Techniques | Dr. SARAVANAN Padmanapan |
10:32 | 10:44 | Selective separation of Rare earths from NdFeB Magnets using Facile pyro/hydrometallurgy method | Mr. Shivendra Sinha |
10:44 | 10:56 | High coercivity Nd-Fe-B magnets produced by grain boundary diffusion process with high glass forming ability alloys | Dr. Uma Maheswara Rao Seelam |
10:56 | 11:08 | Enhancing the coercivity of Nd-Cu diffused Nd-Fe-B permanent magnets by Nb assisted grain boundary pinning | Mr. BHASKAR SIVA KUMAR MUNI |
11:08 | 11:20 | Coercivity enhancement in Nd-Fe-B Rare earth magnets by grain boundary diffusion process | Dr. Arout Chelvne |
Session V, 16th Nov., 2022 | High Entropy Materials II |
| |
|
|
|
|
Start time | End time | Topic | By |
11:30 | 11:50 | High Entropy Alloy: a microstructural cocktail (Invited) | Prof. Saurabh Sanjay Nene |
11:50 | 12:10 | Development of Cost-effective High Entropy Alloys with Tailored Microstructure and Properties by Thermomechanical Processing: Outcomes and Outlook (Invited) | Prof. Pinaki Prasad Bhattacharjee |
12:10 | 12:30 | An Attempt to Develop a Product using High Entropy Alloys in India (Invited) | Dr. Niraj Nayan |
12:30 | 12:42 | Integrated experimental and simulation study of the effect of Al addition on the As-cast microstructure formation in multicomponent multiphase alloy | Mr. MANISH KUMAR SINGH |
12:42 | 12:54 | Facile low temperature synthesis of Single phase high entropy oxide nanocrystalline powders by hydrothermal method | Ms. ARPEETA HOTA |
12:54 | 13:06 | Facile Process for the Preparation of Different Classes of High-Entropy Materials for Advanced Applications | Dr. JAGADEESH SURE |
13:06 | 13:18 | Synthesis and Characterization of Optimum Light Weight and Porous High Entropy Alloys (HEAs) with enhancement of compatible Thermo-mechanical and Tribological Properties | Mr. Agradip Acharyya |
13:18 | 13:30 | Phase Evolution, Thermal Stability and Mechanical Properties of non-equiatomic FeMnNiTiAlSiC High Entropy Steel | Mr. HARSH JAIN |
Session IV, 16th Nov., 2022 | Materials Characterization III |
| ||
|
|
|
| |
Start time | End time | Topic | By | |
09:00 | 09:20 | Multiscaled Microstructures in Sintered and Deformed High Entropy Alloys (Invited) | Prof. Krishanu Biswas | |
09:20 | 09:40 | Using DualBeam for automated and flexible TEM sample preparation from a range of materials (Invited) | Dr. Karthick Balasubramanian | |
09:40 | 09:52 | Investigation of brown patch stain defect occurrence on low C grade steel sheets during batch annealing process | Mr. Kayyam Sai Pranay Teja | |
09:52 | 10:04 | Optimization of planar flow melt spinning process parameters to produce thin, wide and continuous amorphous ribbons of Fe73.5Si13.5B9Nb3Cu1 soft magnetic alloys | Dr. Arvindha Babu Diraviam | |
10:04 | 10:16 | Synthesis ,characterisation and indentation behaviour of melt-spun ribbons of Fe61Cr4Mo14C15B6, Fe45Cr15Mo15Co3C15B6Y2 and Fe45Cr20Mo10W2C15B6Y2 Alloys | Ms. SARIKA KUMARI | |
10:16 | 10:28 | Microstructural Attributes of Superalloy-617M Post-High Cycle Fatigue Loading at Elevated Temperature | Mr. Sandeep Kale | |
10:28 | 10:40 | Influence of R-phase on the mechanical properties of Ni-rich NiTi shape memory alloys | Ms. Ashitha Pattabi | |
10:40 | 10:52 | Characterisation of nano clusters and precipitates formed during thermomechanical treatment in high strength low alloy (HSLA) steels using three dimensional atom probe tomography (3D APT) | Ms. Khushboo Rakha | |
10:52 | 11:04 | Characterisation of 409M Stainless Steel for Chequered Plate Application | Ms. Aditi Paul | |
11:04 | 11:16 | Microstructural analysis of directionally solidified single crystalline Ni-based superalloys (INCONEL 718 and CMSX-4) | Ms. Divya Nalajala | |
Session V, 16th Nov., 2022 | Materials for Advanced Battery II |
| ||
|
|
|
| |
Start time | End time | Topic | By | |
11:30 | 11:50 | Nanostructured Garnet Type Solid Electrolyte: A Tool to Realize High Performance and Safe Solid-State Metal Batteries (Invited) | Prof. Yogesh Kr Sharma | |
11:50 | 12:02 | Recent Progress in Li-ion Battery Recycling (Invited) | Prof. V Aravindan | |
12:02 | 12:14 | Electrical transport studies of Fe3+ doped LiTi2(PO4)3 solid electrolyte for all-solid-state battery applications | Mr. Siddharth Sradhasagar | |
12:14 | 12:26 | Earth Abundant Mg2+ doping in NASICON-type Ceramic Electrolyte for Rechargeable Solid-state Na-ion Batteries | Mr. Raghunayakula Thirupathi | |
12:26 | 12:38 | Fabrication and electrochemical performance of BaCo0.4Fe0.4Zr0.2O3-? : BaZr0.7Ce0.2Y0.1O3-? composite as an air electrode in proton-conducting ceramic cells | Mr. Shivam Kumar Dwivedi | |
12:38 | 12:50 | Role of ?-Lipoic Acid as a Corrosion Inhibitor for Aluminium-Air Battery Application | Mr. MUHAMMAD M | |
12:50 | 13:02 | Designing High Performance Energy Harvesting and Energy Storage Materials: Polymeric Piezoelectric Nanogenerators and Supercapacitors | Dr. Bhanu Bhusan Khatua | |
13:02 | 13:14 | Mechanistic Insights on Bi-Potentiodynamic Control towards Atomistic Synthesis of Electrocatalysts for Hydrogen Evolution Reaction | Dr. Bratindranath Mukherjee | |
13:14 | 13:26 | Phase separation, transformation and grain growth in solution-processed wurtzite-Cu(Ga,In)S2 | Dr. Mohammad Imteyaz Ahmad | |
13:26 | 13:38 | Transition Metal Doped SnTe and GeTe-based Materials for Thermoelectric Application | Dr. Bhuvanesh Srinivasan | |
13:38 | 13:50 | Enhanced hydrogen storage in Mg-Ni-Carbon composite synthesised by ball milling | Mr. Anshul Gupta |